Abstracts

¹4, 2004   ¹5, 2004   ¹6, 2004   ¹1, 2005   ¹2, 2005   ¹3, 2005   ¹4, 2005   ¹5, 2005   ¹6, 2005   ¹1, 2006   ¹2, 2006   ¹3, 2006   ¹4, 2006   ¹5, 2006   ¹6, 2006   ¹1, 2007   ¹2, 2007   ¹3, 2007   ¹4, 2007   ¹5, 2007   ¹6, 2007   ¹1, 2008   ¹2, 2008   ¹3, 2008   ¹4, 2008   ¹5, 2008   ¹6, 2008   ¹1, 2009   ¹2, 2009   ¹3, 2009   ¹4, 2009   ¹5, 2009   ¹6, 2009   ¹1, 2010   ¹2, 2010   ¹3, 2010   ¹4, 2010   ¹5, 2010   ¹6, 2010   ¹1, 2011   ¹2, 2011   ¹3, 2011   ¹4, 2011   ¹5, 2011   ¹6, 2011   ¹1, 2012   ¹2, 2012   ¹3, 2012   ¹4, 2012   ¹5, 2012   ¹6, 2012   ¹1, 2013   ¹2, 2013   ¹3, 2013   ¹4, 2013   ¹5, 2013   ¹6, 2013   ¹1, 2014   ¹2, 2014   ¹4, 2014   ¹5, 2014   ¹6, 2014   ¹1, 2015   ¹2, 2015   ¹3, 2015   ¹4, 2015   ¹5, 2015   ¹6, 2015   ¹1, 2016   ¹2, 2016   ¹3, 2016   ¹4, 2016   ¹6, 2016   ¹1, 2017   ¹3, 2017   ¹4, 2017   ¹5, 2017   ¹6, 2017   ¹1, 2018   ¹2, 2018   ¹3, 2018   ¹4, 2018   ¹5, 2018   ¹6, 2018   ¹1, 2019  

¹4, 2006

The Ozone-Resistance of the Covulkanized Rubbers of Various Polaritó – Livanova N.M., Lyakin Yu.I., Popov A.A., Shersh-nev V.A. (P. 2).

Effect of composition of ethylene-propylene rubber of high propylene units regularity on the structure and properties of their covulkanized blends with butadiene acrylonitrile rubbers of different polarity. Structure and ozone-resistance have been evaluated by means of stress relaxation, density of interphase layers – by deviation from additive values of swelling in heptane. The higher is the polarity the lower is the ozone-resistance. Effect of parameters of interphase layers and vulcanization network as well as structure of ethylene-propylene rubber is shown.

Physico-Chemical Changes of Tire Elastomers under Service – Shakhovets S.E., Shakhovets F.S., Bogdanov V.V., Kurlyand S.K. (P. 8).

Changes of molecular structure of tires elastomers based on blends of isoprene and butadiene rubbers under service have been studied by means of comparison of contents and composition of sol/gel fractions, IR-spectra and temperature dependencies of tgd before and after service. Results obtained show that elastomers of worn-out tires are valuable row materials for reclaim.

Properties of Rubber Compounds and Vulcanized Rubber Based on Butadiene Acrylonitrile Rubber Synthesized with the Use of Blends of Emulsifiers – Maskalyunaite O.E., Morozov Y.L., Sukhinin N.S., Zabolotskikh S.Yu., Bubenev V.A., Bukhtiyarova N.M. (P. 9).

Processing and mechanical properties of rubber compounds and vulcanized rubber based on butadiene acrylonitrile rubber synthesized with the use of blend of potassium paraffinate and sodium sulfate have been studied. Positive effect on low-temperature properties is shown.

Rheological Investigation of Styrene-Butadiene Rubber Filled by Carbon Containing Wastes – Korchagin V.I., Sklyadnev E.V. (P. 11).

Deformation of styrene-butadiene rubber filled by exhausted active coal and two types of carbon black has been studied in capillary viscometer under different shear rate. Results obtained especially viscosity anomaly open the possibility to evaluate the rubber/filler interaction.

Modification of Natural Rubber by Ozonolysis of Latex – Poluektov P.T., Vlasova L.A., Gusev Yu.K., Shutilin Yu.F., Grishin B.S. (P. 15).

Modification of natural rubber at the stage of latex by controlled ozonolysis has been studied. The possibility to introduce the required number of high-reactive functional groups is shown. Increase of green strength of natural rubber after modification is shown.

The Composition Control of the Novel Blends Based on the Natural Rubber and Bacterial Poly(3-Hydroxybutyrate). IR-Fourier Method – Markin V.S., Iordanskii A.L., Lyusova L.R., Potapov E.E.. (P. 17).

The composition quantity analysis of the novel polymeric blends on the base of poly(3-hydroxybutyrate) and natural rubber was carried out by IR-Fourier spectroscopy. The calibrating graph was plotted to connect optical density at 1740 cm-1 with film thickness. A reasonable agreement between spectroscopy and analytical data observed. This approach is useful for both the control of blending and estimation of physico-chemical factors’ action.

Power Calculation of Disk Crushers for Worn-Out Tires – Veschev A.A., Plotnikov R.S. (P. 20).

Design of improved crushers for worn-out tires as well as method of calculation of its processing parameters are presented.

Properties of Materials Based on Particles of Rubber and Thermoreactive Polymer – Serenko O.A., Goncharuk G.P., Kechek’yan A.S., Meshkov I.B., Muradova U.A., Bazhenov S.L., Muzafarov A.M. (P. 25).

Mechanical properties of materials consisting of rubber cramp of paricles from 50 to 1000 mkm mixed with small amount of oligoetheracrilats and epoxy resins have been studied. Addition of 10% of resins results in increase of mechanical characteristics of materials depending on rubber/resin adhesive interaction.

Combining of fluoroelastomers with other polymers – Nudel’man Z.N. (P. 27).

Review of publications devoted to combining of fluoroelastomers with other polymers.

Results of the XII International Scientific – Practical Conference «Rubber Industry, Row Materials, Processing» – Pichu-gin A.M. (P. 37).

Review of papers presented on Conference «Rubber Industry, Row Materials, Processing», organized by NTC «NIIShP» (22 – 26.05.06 (Boarding Hause «Lipki», Zvenigorod, Moscow distr.)

100 Years from the Birthday of S.S. Voyutskii – Tutorskii I.A., Solov’eva T.S. (P. 38).

Information about jubilee meeting devoted to 100 anniversary of Prof. S.S. Voyutsky (14.03.06, MITChT by M.V. Lomonosov, Moscow).

Giprokauchuk – 75 Years – Fedotov V.I., Rezova A.K. (P. 39).

Information about history, development and to-day state of Design and Scientific Institute of Synthetic Rubber Industry «Giprokauchuk».

About Meeting of IRCO Committee in Lyons – Morozov Yu.L. (P. 43).

Information about meeting of IRCO Committee (Committee on International Rubber Conferences) holds simultaneously with International Rubber Exhibition (17.05.06, Lyons, France).

©ÎÎÎ «Èçäàòåëüñòâî «Êàó÷óê è ðåçèíà», 2018 ã.